➂
How to Copy HDDs
14
Step 3: Enter Function "1.Copy"
Use
▲▼
keys to select "1.Copy", and then press "OK". Duplication will start to proceed.
Note
When all the target HDD ports are plugged, the machine will start duplicating automatically. If
not all ports are plugged, the number of working targets shows on LCD. Press "OK" to start.
The information below shows on LCD during duplication.
Note
• Press
▲▼
together for 5 seconds to stop operation on the slowest HDD.
• It is able to use “On-Time Monitor” feature to check operation speed of every port.
複製 x1 2047M
0:12 50% （2）1024M
複製 x1 2047M
0:12 50% （2）1024M
Function
複製 x1 2047M
0:12 50% （2）1024M
功能
總容量
已拷貝容量
最慢速口
已拷貝時間
及百分比
Total Data
Copied
data
Slowest
port
Copied
time & %
Step 4: Completion!
Quality of copy OK/Fail and duplication time would show on LCD after duplication completes.
• During process of duplication, every port captures in real-time and message shown on LCD
and calculates CRC checksum code.
• Once copy operation is completed, the system will immediately show comparison results
between source and target HDDs. The red light will flash when error occurs.
• It is able to record real-time checksum code output to Log report.
好的:1 壞的:0
使用時間 0:48
Pass:1 Fail:0
Time 0:48
好的:1 壞的:0
使用時間 0:48
Pass:1 Fail:0
Time 0:48
Pass:20 Fail:0 0:51
CRC64:580A62871707DEE3
好的:20 壞的:0 0:51
校驗碼:580A62871707DEE3
Pass:20 Fail:0 0:51
CRC64:580A62871707DEE3
好的:20 壞的:0 0:51
校驗碼:580A62871707DEE3
★
Checksum code: During duplication, each port will simultaneously record written message
and calculate checksum code between source and targets. The result will show light in red(fail)
or green(pass).
