U-Reach MD801, User Manual, Page: 40 / 48

40
II. Function
(Disc Duplicator)
9-8. Format HDD
This function allows you to format the built-in HDD while the HDD is NOT
selected as reading source. You can change the source from HDD to other
drive in 6. Select Source.
Due to the capacity for discs loading is hard to predict precisely and more
and more different discs are coming out. The traditional method of format is
not ideal for using on this duplicator. Our HDD management technology is
able to detect disc capacity and assign a proper partition for the disc’s data
automatically. You do not have to predict and select CD or DVD partition
in the beginning and you can check how many discs you can upload from
7. Show HDD Info. This intelligent HDD management technology is much
easier for HDD management than the old way.
9-9. Load & Copy
This function is for the system to load the source to HDD and make copy
synchronously. The system will load the source to HDD during the first round
of duplication, and the HDD will replace the reader drive to be the source in
second round of duplication. This special function is very convenient for a big
copy task. You also can set:
● Synchronous: The system will load the source to HDD and make copy at
the same time.
● Load First: The system will load source to HDD first and take HDD as
source to copy.
● OFF: To turn off the Load & Copy function.
**Note:
1 The image file will only be saved temporary if it is loaded to HDD
by Load & Copy function.
2 If you would like to save the file permanently please load the file to
HDD by manual (refer to 9-2.Disc to image, page 37)