33
II. Function
(Disc Duplicator)
3. The system will detect the update file and execute update task
automatically.
4. Once the update job has done, the system will require you to reboot the
system.
7-8. PRINT LS Label
This function will let you using the Lightscribe technology to print your own
image on discs.
The operation process please refer to Appendix Lightscribe Operation.
8. Setup
8-1. Auto Start Time
This setting will allow the system to do the Copy, Test, Compare and Copy
+ Compare functions automatically in a few seconds once the source and
blank discs are placed in the trays and detected by the system. The default
setting is 5 seconds. You can set a longer/shorter time from 1 to 99 seconds
or set OFF to disable this function and execute copy task by manual.
1. Pressing / to select 8.Setup and sub menu 1.Auto Start Time.
**Note:
DO NOT save the firmware in a folder. The system can not detect
the firmware if you save it in a folder.
Summary of Contents for MD801
Page 1: ...MD Series Duplicator User Guide V3 10 www ureach inc com the Expert of Duplicators...
Page 47: ......
Page 48: ......
