※
Troubleshooting When Duplication Fails
Check if too many bad tracks on HDD/USB can cause duplication failures.
Check the setting of function “6.2 Skip Error”.
[ Skip Error ]
0
●
Make sure all ports/cables are properly and firmly connected.
●
Make sure the capacity of source is smaller than target. Please go to the function to check
capacity, “5.1 Show Disk Info”
Or “5.2 Show USB Info”
.
[5.Utility ]
1.Show Disk Info
⌘
Check Related Information
Please enter the following functions to check and confirm your device information before
duplication.
※
Check HDD/USB Info
Check the device related information, “5.1 Show HDD Info”, or “5.2 Show USB Info”.
The functions show basic information of both source and target. Check the basic information
for USB or HDD information.
[ 5.Utility ]
2.Show USB Info
17
