U-Prox IC E Installation And Programming Manual Download Page 10 | Manualshive

Page: 10 / 21

U-Prox IC E Installation And Programming Manual Download Page 10

http://u-prox.com

10

"Free Pass” Mode

There are circumstances when you need to open some of access points for free
pass of people. For this case, the panel has "Free Pass" mode.

The  access  point  goes  into  "Free  Pass"  Mode  after  the  command  of  operator  from
the  computer.  The  panel  is  in  "Free  Pass"  mode  until  the  command  from  the
computer comes

As long as access point is in "Free Pass" mode, all floor buttons remained
connected and the panel stores a log event "Access granted" on presentation of RF
ID code regardless of the schedules, etc.

“Blocking" mode

If  it  is  necessary  to  deny  access  to  all  or  some  floors  for  users  of  the  system,  the
panel  switches  into  “Blocking"  mode.  If  panel  in  “Blocking"  mode,  the  passage  is
granted  only  to  owners  of  RF  IDs  with  the  sign  "Security  Service".  One  cannot
unblock floor buttons with panel inputs.

Panel goes into “Blocking" mode after the operator command from the computer.
Panel is in “Blocking" mode until the command from the computer.

RF ID properties (cards)

Code (RF ID card code)

Each card has a unique code which is set at the time of its manufacture. It consists
of 10 hexadecimal digits.

PIN-code

Additional code is assigned to the card. It consists of no more than six decimal digits.
It can be used together with readers that have a built-in keyboard.

Enter PIN code with the reader's keypad and press '#' key. Always enter PIN code
AFTER the card pass. If PIN-code is correct, panel unlocks access point and grants
access. Otherwise, panel generates a warning signal, and records "Invalid PIN-
code" event into the log. Door remains closed.

Validity (of Card)

Card Validity expiration date

Alarm Cancel

Passing the card to door reader, when the door is in "Alarm" state, panel registers
event "Alarm cancelled" and puts the door to Normal mode. If the card that has no
right to cancel the “Alarm” is passed, the door will remain in the same state. Event
“Access denied. Alarm Status" recorded into the log.

In "Free Pass” Mode LED of reader flashes green and yellow.

In Mode "Blocking" LED is alternately flash red and yellow

«
...
8
9
10
11
12
...
»

Summary of Contents for IC E






















Reviews:

No comments