37
MAINTENANCE INSTRUCTIONS
WALKING BELT CENTERING AND TENSION ADJUSTMENT
DO NOT OVERTIGHTEN the walking belt. This may cause reduced motor performance and
excessive roller wear.
TO CENTER WALKING BELT:
● Place treadmill on a level surface
● Run treadmill at approximately 3.5 mph
● If the belt has drifted to the right, turn the right adjusting bolt 1/2 turn clockwise and the left
adjusting bolt 1/2 turn counterclockwise
● If the belt has drifted to the left, turn the left adjusting bolt 1/2 turn clockwise and the right
adjusting bolt 1/2 turn clockwise and the right adjusting bolt 1/2 turn counterclockwise
Picture A If the belts has drifted to the RIGHT Picture B If the belts has drifted to the LEFT
WARNING:
ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET BEFORE CLEANING
OR SERVICING THE UNIT.
CLEANING
General cleaning or the unit will greatly prolong the treadmill.Keep treadmill clean by dusting regularly.
Be sure to clean the exposed part of the deck on either side of the walking belt and also the side rails.
This reduces the build up of foreign material underneath the walking belt.
The top of the belt may be cleaned with a wet, soapy cloth. Be careful to keep liquid away from inside
the motorized treadmill frame or from underneath the belt. Warning
：
Always unplug the treadmill from
the electrical outlet before removing the motor cover. At least once a year remove the motor cover and
vacuum under the motor cover.
WALKING BELT AND DECK LUBRICATION
This treadmill is equipped with a pre-lubricated, low maintenance deck system. The belt/ deck friction
may play a major role in the function and life of your treadmill, thus requiring periodic lubrication.
We recommend a periodic inspection of the deck.
We recommend lubrication of the deck according to the following timetable:
● Light user (less than 3 hours/ week) annually
● Medium user (3-5 hours/ week) every six months
● Heavy user (more than 5 hours/ week) every three months
BILD A
BILD B
