USER GUIDE
Anti-Tip Bracket 1
u-line.com
SAFETY •
INSTALLATION & INTEGRATION
• OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
Anti-Tip Bracket
CAUTION
!
The anti-tip bracket must be installed to prevent
the unit from tipping when doors are fully
opened, or excess weight is placed on the front
of the unit.
The anti-tip bracket has multiple mounting options.
Mounting will depend on your particular cabinet
configuration. Follow the instructions below to secure the
anti-tip plate to the unit. Locate your anti-tip bracket and
5 #8x5/8" (#8x16 mm) screws included with your unit.
TOP MOUNT
Top mount configurations work well with fully secured
wood or laminate countertops.
1. Align the bracket on top of your unit as shown above.
The bracket must be used to ensure a secure mount.
2. Using 2 of the supplied #8x5/8" (#8x16 mm) screws,
install screws into the plate using a #2 Phillips head
screwdriver.
3. Completely slide the unit into its position in the
cabinet. Be certain unit height is properly adjusted.
(See Leveling section).
4. Open door completely. Make certain door clears
surrounding cabinetry.
5. Using a 3/32" (3 mm) drill bit, drill 3 pilot holes, 5/8"
(16 mm) deep into bottom of counter top. Use the
anti-tip bracket as a template.
6. Install the remaining 3 #8x5/8" (#8x16 mm) screws
into the plate using a #2 Phillips head screwdriver.
SIDE MOUNT
Side mount configurations work well if you have a granite
countertop or do not wish to mount the bracket to the
underside of your countertop.
1. Align the bracket to the hinge side of the unit as shown
above.
2. Using 2 of the supplied #8 5/8" (#8x16 mm) screws,
install screws into the plate using a #2 Phillips head
screwdriver.
3. Completely slide the unit into its position in the
cabinet. Be certain unit height is properly adjusted.
(See Leveling section).
4. Open door completely. Make certain door clears
surrounding cabinetry.
Left Hinged Cabinet
Right Hinged Cabinet
