USER GUIDE
u-line.com
Reference Diagrams
Reference Diagrams
DANGER
!
Electrocution can cause death or serious injury.
Burns from hot or cold surfaces can cause
serious injury. Take precautions when servicing
this unit.
Disconnect the power source.
Do not stand in standing water when working
around electrical appliances.
Make sure the surfaces you touch are not hot or
frozen.
Do not touch a bare circuit board unless you
are wearing an anti-static wrist strap that is
grounded to an electrical ground or grounded
water pipe.
Handle circuit boards carefully and avoid
touching components.
REMOVE BASE ASSEMBLY
1. Disconnect power to the unit.
2.
Turn off water supply.
3.
In the front of the machine, take out 2 Philips screws
and remove front access panel.
4.
Remove cable tie and disconnect door switch (plunger
switch) lead.
5.
Separate Control board from unit.
a. Insert a screwdriver above the enclosure and
gently pry downward (the enclosure is held in
place by double-sided tape).
b. Gently pull board and enclosure toward you
(do not disconnect any other wires).
33
