USER GUIDE
u-line.com
Reference Diagrams
Reference Diagrams
1.
Unplug the gear motor (three connectors)
2.
Remove ground screw connection.
3.
Remove gear motor
a. Remove M6 allen screw, retainer, spacer and key
b. Remove two M6x90 allen screws
c. Pull gear motor from auger
d. Remove main housing insulation
4.
Remove all traces of Petrol-gel from auger shaft
5.
Remove compression nozzle
a. Loosen hose clamp
b. Remove transport tube
6.
Remove M6 socket head allen screw
7.
Remove compression nozzle retainer
8.
Remove compression nozzle
9.
Remove main housing
•
Disconnect vent line from T fitting
10.
Remove three M6x25 socket head allen screws
11.
Remove main housing
12.
Remove and discard mating ring and seal
13.
Carefully remove augerRemove
The auger is very sharp; handle with care to avoid
personal injury.
DISASSEMBLE EVAPORATOR MODULE
Remove Gear Motor and Auger
3a
3b
3c
3d
3b
5a
5b
6
7
8
9
10
11
12
13
WARNING
!
35
