QUICK START GUIDE
u-line.com
Control Operation
CONTROL FUNCTION GUIDE
FUNCTION
COMMAND
NOTES
ON/OFF
Press and release
Unit will immediately turn On or OFF
Adjust ice density
See “Ice” section
Enable Sabbath Mode
Press and hold for 5 seconds and
release
The oF / o
C symbol will flash briefly after 5 seconds.
Interior light and display will go dark and remain so
until user resets mode - unit continues to operate
Disable Sabbath Mode
Press and release Display and interior light return to normal operation
Clean Mode
See “Cleaning” section
Showroom Mode
Hold and for 5 seconds
The ºF / º
C symbol will flash. Display will be lit and
interior light will function. Unit will not cool. Repeat
command to return to normal operation
This unit is Star-K certified. See www.star-k.org
for more details.
DOOR ALERT NOTIFICATION
When the door is left open for more than 30 minutes:
• Ice production will cease
• A tone will sound for several seconds every minute
•
will appear in display
Close door to silence alert and reset (Ice production will
resume if bin sensor is not satisfied)
Temperature displayed reflects actual
temperature inside unit.
Initial startup requires no adjustments. When plugged
in, the unit will begin operating under the factory default
settings. If the unit was turned off during installation,
simply press and the unit will immediately switch on. To
turn the unit off, press .
If the temperature displayed is different than selected, the
unit is progressing towards the selected temperature. Time
to reach set point varies based upon ambient temperature,
temperature of product loaded, door openings, etc. U-Line
recommends allowing the unit to reach set points before
loading.
NOTICE
First Use
12
