USER GUIDE
u-line.com
Remove Fan and Cover
NOTICE
Fan must be oriented to pull air in through lower
evaporator cover vents and push air out at fan
mounting location.
13. Installation is the reverse of removal.
14. Care must be taken to assure the bottom of the
evaporator cover is reinstalled behind the front edge of
the train trough.
15. Use sealant gum to seal any openings at rear of unit
before replacing rear cover.
16. Reinstall unit taking care to level, space and secure as
found.
5. Grab ahold of each fan assembly and
push toward the interior of the unit to
remove the motor shaft from the
rubber gasket. (See figure 5)
6. Once the shaft is free of the gasket,
rotate the fan assembly upward and out
toward you and away from the
mounting bracket.
7. Installation is the reverse of removal.
8. Take special care to properly route
wires away from fans and copper tubing
and make sure fan motor is secured in
rubber gasket.
9. Use sealant gum to seal any openings at
rear of unit before replacing covers.
10. Reinstall unit taking care to level, space
and secure as found.
6.
2QFHWKHVKDIWLVIUHHRIWKHJDVNHWURWDWHWKHIDQ
DVVHPEO\XSZDUGDQGRXWWRZDUG\RXDQGDZD\IURP
WKHPRXQWLQJEUDFNHW
7.
,QVWDOODWLRQLVWKHUHYHUVHRIUHPRYDO
8.
7DNHVSHFLDOFDUHWRSURSHUO\URXWHZLUHVDZD\IURP
IDQVDQGFRSSHUWXELQJDQGPDNHVXUHIDQPRWRULV
VHFXUHGLQUXEEHUJDVNHW
9.
8VHVHDODQWJXPWRVHDODQ\RSHQLQJVDWUHDURIXQLW
EHIRUHUHSODFLQJFRYHUV
10.
5HLQVWDOOXQLWWDNLQJFDUHWROHYHOVSDFHDQGVHFXUHDV
IRXQG
49
Summary of Contents for UCBR552-SS01A
