background image

6

u-line.com

Leveling

NOTICE

Unit must be level, for proper door and ice maker (if 
equipped) operation. 

For Models with adjustable leveling feet:

1. Use a level to check the levelness of the unit from front to back 

and from side to side. Place the level along top edge and side 
edge as shown (1).

2. If the unit is not level, rotate the adjustable leveling legs to raise 

or lower each corner of the unit as necessary.

3. Check levelness after each adjustment and repeat the previous 

steps until the unit is level.

For Models without adjustable leveling feet:

NOTICE

The unit must be located on a level surface, for proper 
door and ice maker (if equipped) operation. 

Use a level to check the levelness of the unit from front to back 
and from side to side. Place the level along top edge and side 
edge as shown (1).

Removing and Installing Interior Shelves

For models equipped with glass shelves having shelf supports, 
remove the shelves as follows:

1. Open door completely.

2. Grasp the shelf edge in the center and slide the shelf from the 

unit.

Insert the shelves as follows:

1. Reposition the shelf as required, ensure the raised white edge 

strip is toward the rear of the unit and graphics, if applied, are 
on the underside of the shelves.

2. Gently slide the shelf back in to the cabinet at the desired 

position.

Maintenance

1

Summary of Contents for U-CO29B-00






















Reviews: