PAGE 6 OF 21
0122 IH-9934
MAINTENANCE CONTINUED
REPLACING VACUUM BELT
NOTE: To ensure maximum cleaning efficiency,
the belt should be in good condition. Inspect it
regularly to see if it is stretched or cracked, or
if excessive slipping is occurring. Replace as
needed.
1. Turn the vacuum off and unplug the charger from
the charge point.
2. Remove battery.
3. Remove bottom plate.
4. Remove brush roll and worn or broken belt from the
brush roll pulley and motor drive shaft.
5. Loop new belt around motor drive shaft and brush
roll. (See Figure 18)
6. Reinstall the brush roll into the nozzle. Turn brush
roll by hand, ensuring the belt is not twisted and all
rotating parts move smoothly. (See Figure 19)
7. Reinstall bottom plate.
8. Replace battery.
REPLACING SQUEEGEE
1. If squeegee splits or begins to look worn, slide off
from its track and slide a new one on in its place.
Figure 19
Figure 18
Brush
Roll
Belt
