QUICK START GUIDE
u-line.com
15
Control Operation
CONTROL FUNCTION GUIDE
FUNCTION
COMMAND
NOTES
ON/OFF
Press and hold for 5 seconds
Unit will turn On or OFF
Adjust Temperature
Press or and release
When the display is flashing, press or to
adjust the set point temperature. Note: temperature
displayed is the actual temperature inside unit
Toggle between ºF / ºC
Hold and for 5 seconds
The display will change units
Temperature displayed reflects actual
temperature inside unit.
Initial startup requires no adjustments. If the unit was
turned off, press and hold for 5 seconds to turn unit on.
See “Control Operation” section for more details.
If the temperature displayed is different than selected, the
unit is progressing towards the selected temperature. Time
to reach set point varies based upon ambient temperature,
temperature of product loaded, door openings, etc. U-Line
recommends allowing the unit to reach set points before
loading.
To dispense cold coffee, make sure the components are
assembled according to the instructions in GENERAL
INSTALLATION.
NOTICE
First Use
DE-PRESSURIZE SYSTEM
Fill the Keg
NOTICE
Before attempting to fill the keg it is necessary to
confirm system is not pressurized.
1.
Shut off nitrogen tank by turning handle clockwise until
it stops.
2. Lift up on pressure release valve ring. Allow pressure to
release.
3. Detach hoses from keg. (See General Installation
section of this guide.)
