PAGE 2 OF 6
1221 IH-9940
1-800-295-5510
uline.com
ASSEMBLY CONTINUED
3. Attach drawer brackets using four wood screws.
(See Figure 3)
4. Remove the spacing bars from the drawer brackets.
These can now be discarded. (See Figure 3)
Figure 3
Wood Screw
5. Drawer and drawer housing come attached. To
remove the drawer from the housing, fully extend
drawer from the housing. Flip one plastic tab on
sliding rails up and the second plastic tab on sliding
rails down. Drawer is now unlocked from housing
and can be removed. (See Figure 4)
Figure 4
Drawer
Tab
6. Align holes at the top of the drawer housing with
holes in drawer brackets. (See Figure 5)
7. Attach drawer housing to drawer brackets using four
Phillips head bolts and four flange nuts. (See Figure 5)
Figure 5
Drawer Bracket
Drawer Housing
8. Insert drawer and turn packing table upright. Slide
drawer in and out a few times to check operation.
(See Figure 6)
Figure 6
NOTE: Drawer and suspension have a 70 lb.
weight capacity.
