PAGE 3 OF 19
0721 IH-9330
MOUNTING CONTINUED
5. Secure downrod in position by tightening jam
screw. Slide yoke cover down so it is flush with motor
housing. (See Figure 5)
MOUNTING BRACKET
WARNING! To reduce the risk of fire, electric
shock or personal injury, mount to UL/CSA listed
outlet box marked acceptable for fan support
and use mounting screws provided with outlet
box.
1. Install the J-hook through center of outlet box and
into wooden joist. Secure mounting bracket and
rubber gaskets to outlet box using outlet box screws
(not provided). (See Figure 6)
2. Hang the safety cable onto the J-hook. Insert top of
fan downrod into mounting bracket. (See Figure 7)
ELECTRICAL HOOK-UP
CAUTION!
• Green Wire – Ground
• Black Wire (Fan) – Power
• White Wire (Fan) – Common
See safety precautions on page 2 before wiring.
NOTE: After making the wire connections,
ensure wires are spread apart with the
grounded conductor and the equipment-
grounding conductor on one side of outlet box
and ungrounded conductor on other side of
outlet box. Ensure the completed splices are
turned upward and pushed carefully up into
the outlet box.
CONNECTING THE (GREEN) GROUND WIRE
1. Connect ground wire from outlet box to green wire
from mounting bracket and downrod using a wire
nut (not provided). (See Figure 8)
NOTE: Once ground wires are connected,
carefully tuck wires and wire nut into outlet
box, ensuring wires are clear of downrod when
positioned in mounting bracket.
Jam Screw
Motor Housing
Figure 5
Yoke Cover
Mounting
Bracket
J-hook
Safety Cable
Downrod
Figure 7
Mounting
Bracket
Rubber
Gaskets
J-hook
Outlet Box
Screws
Figure 6
Wooden
Joist
Outlet Box
Wire Nut
Figure 8
Mounting
Bracket
Downrod
Outlet Box
