PAGE 2 OF 9
1120 IH-9013
ATTACH TOP BAR
1. Place top bar between the two support panels.
2. Align holes on inside of support panels.
3. Insert two short bolts through holes. Thread on M6 flange nuts
and secure using 10 mm wrench, but do not tighten.
(See Figure 2)
4. Repeat steps 2 and 3 on opposite side.
ATTACH PEGBOARD PANELS
1. Place one pegboard panel across the bottom portion of
the two support panels so the second hole from the top and
bottom of the pegboard panel aligns with holes in the support
panels. (See Figure 3)
2. Insert six short bolts through the holes in the pegboard.
Thread on M6 flange nuts and secure using 10 mm wrench,
but do not tighten. (See Figure 3)
3. Repeat steps 1 and 2 for remaining pegboard panel. Install
bottom pegboard panel before installing top pegboard
panel.
ATTACH SHELVES
1. Place 12" shelf between the two support panels.
2. Align holes on inside of support panels.
3. Insert two short bolts through holes. Thread on M6 flange nuts
and secure using 10 mm wrench, but do not tighten. Repeat
on opposite side. (See Figure 4)
4. Repeat steps 2 and 3 with remaining two shelves.
Figure 2
Top Bar
Back
View
Figure 3
Figure 4
ASSEMBLY CONTINUED
8" Deep
10" Deep
12" Deep
