U-Line H-7986 Assembly Download Page 3

PAGE 3 OF 12 

1220 IH-7986

SAFETY

SAFETY PRECAUTIONS

1.  Before using sprayer with chemicals, fill sprayer with 

fresh water to ensure that it is properly assembled; 

pressurize and practice spraying. Check for 

any leaks at this time. When thoroughly familiar 

with sprayer operation, follow normal operating 

procedures listed in Operation on page 2.

2.  Ensure all pressure in the sprayer is relieved by 

locking shut-off valve in the open position.

3.  Avoid contact with chemicals.

4.  Always wear rubber gloves, safety goggles and 

appropriate protective clothing.

5.  Work in a well-ventilated area.

6.  Individuals should be trained in the proper use of 

sprayer, chemical handling procedures and first  

aid/emergency care. Where training is not available, 

individuals should study and follow procedures 

detailed in these instructions.

WARNING! Chemicals can be harmful to 
individuals and the environment if improperly 
used. Some chemicals are caustic, corrosive 
or poisonous and should be avoided. Read 
warnings and chemical manufacturers' 
instructions. Sprayer is fitted with chemical 
resistant seals that are compatible to a 
wide variety of agricultural and household 
chemicals; however, care should be exercised 
to ensure that sprayer components are clean, 
functioning properly, and in a good state 
of repair before and during use. If in doubt 
about a particular chemical, check with the 
manufacturer. 

WARNING! If you suspect or observe indications 
that the material in Backpack Pressure Sprayer 
may be unsafe, stop! Do not use or apply 
chemical. Always wear rubber gloves, goggles 
and appropriate protective clothing!

•  Read and follow operating instructions.

•  Do not fill with, use or spray flammable materials.

•  Do not modify sprayer.

•  Never spray in the direction of humans, animals 

or property that might be injured or damaged by 

spray formula.

•  Do not use disinfectants, solvents or impregnating 

agents unless first tested to ensure they are not 

harmful to the environment or sprayer.

•  Do not use liquids with a temperature above 110°F.

•  Wear appropriate protective clothing to prevent 

contact with chemical agents.

•  Rinse and clean sprayer thoroughly after use. 

Disposal of contaminated rinse should be in 

accordance with applicable ordinances. Observe 

precautionary instructions of chemical manufacturer.

•  Do not use any acid (including citrus) or caustic 

chemicals.

•  Remember that a sprayer with liquid is a significant 

amount of weight (8 lbs. per gallon). Do not climb 

when wearing sprayer. Use caution when bending, 

leaning or walking. Bend at the knees rather than 

the waist.

•  During sprayer operation, the pressure cylinder 

(#4400240) contains compressed air and liquid. 

Compressed air and liquid under pressure are 

inherently dangerous. 

•  Before making adjustments on sprayers fitted with 

a pressure regulating valve assembly (#480182) 

located on pressure cylinder or any other repair or 

inspection of any sprayer, be sure to relieve pressure 

through the shut-off valve and wand.

Summary of Contents for H-7986













Reviews: