PAGE 1 OF 9
0321 IH-5441
π
H-5441, H-5442
HEAVY DUTY
SCISSOR LIFT TRUCK
1-800-295-5510
uline.com
WARNING! Read and understand instructions
here and on truck prior to use.
The control lever on the handle of the truck can be set in
three positions. (See Figure 1)
RELEASE = to lower the forks
SLOW LIFT = slowly raise the forks (use when moving load)
QUICK LIFT = quickly raise the forks
1. Before use, remove shipping cap located at top of
pump unit using flathead screwdriver. (See Figure 2)
2. Install large breather cap and O-ring on pump unit.
(See Figure 2)
3. If forks do not lift or lower while in the QUICK LIFT position,
turn the setting screw counter-clockwise until the forks
elevate while pumping in the QUICK LIFT position.
4. If forks do not lower, turn the setting screw clockwise
until raising the control lever lowers the forks.
NOTE: When viewing the truck from the handle
side, the setting screw is located on the right
side of the pump, above the right wheel.
The truck will lower faster or slower depending
on how far in or out the screw is. (See Figure 3)
TECHNICAL DATA
MODEL
H-5441
H-5442
Capacity
3,000 lbs. 3,000 lbs.
Min. Fork Height
3½"
3½"
Max. Fork Height
31½"
31½"
Fork Length
46"
46"
Overall Fork Width
27"
21"
Fork Wheel Diameter
3" Polyurethane
Steering Wheel Diameter
7" Polyurethane
OPERATION
Figure 1
RELEASE
SLOW
LIFT
QUICK
LIFT
RELEASE
SLOW
LIFT
QUICK
LIFT
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
TOOL NEEDED
Flathead Screwdriver
Figure 2
Shipping
Cap
Breather
Cap
O-Ring
