PAGE 4 OF 12
0521 IH-2932
7. Push in battery holder. (See Figure 7)
8. Tighten screw. (See Figure 8)
9. Swing battery cover down. (See Figure 9)
10. Push into locked position. (See Figure 10)
11. If the battery is inserted while the knob is locked,
you should hear the lock mechanism click and the
unit will lock. If the battery is inserted while the knob
is unlocked, after turning the knob to the locked
position, you will hear the lock mechanism click and
the unit will lock.
NOTE: If the unit will not lock after inserting the
battery, enter the master code, move the knob
to the unlocked position, then move the knob
to the locked position. You should hear the lock
mechanism click and the unit will lock. If the
unit does not lock, replace the battery.
REPLACING THE BATTERY CONTINUED
Figure 7
Figure 8
Figure 9
Figure 10
1-800-295-5510
uline.com
