PAGE 4 OF 12
1014 IH-2027
3. Insert long nose pliers or screwdriver to clear jam.
(See Figure 6)
4. Slowly release pusher back into position.
(See Figure 7)
MAINTENANCE CONTINUED
TROUBLESHOOTING
Figure 6
Figure 7
OPERATING ISSUE
CAUSES
RECOMMENDATIONS
Air leak from trigger.
O-ring on valve is damaged.
Tube on valve is damaged.
Replace the o-ring.
Air leak from exhaust port.
O-ring on valve is damaged.
Tube on valve is damaged.
Piston o-ring is damaged.
Replace the o-ring.
Air leak from cylinder.
Magazine seat o-ring is damaged.
Replace the o-ring.
Excessive jams.
Clincher screws are loose.
Staple size is wrong.
Insufficient lubrication.
Tighten screws.
Use the proper size staple.
Clean and lubricate sufficiently.
Uneven clinch.
Wrong staple size.
Check for proper leg length
adjustment and clincher size.
Unclinched staple.
Clincher is loose.
Clincher is broken.
Tighten clincher.
Replace clincher.
WARNING! Stop using the stapler immediately if any of the following problems occur. Any repairs or
replacements must be done only by a qualified person or an authorized service center.
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com