PAGE 1 OF 15
0223 IH-1287
1-800-295-5510
uline.com
STRETCH WRAP
LOW PROFILE
TURNTABLE
H-1287
TECHNICAL DATA
Length
101"
Width
65"
Height
15"
Turntable Height from Floor
3.2"
Maximum Pallet Size
52" x 52
Operation Space
105" L x 75" W
Shipping Weight
1,000 lbs
ELECTRICAL
• 120 VAC, 60 Hz, Single-phase, 15 AMP
TURNTABLE
• 1/2 HP 3-phase AC motor
• 1/2 HP AC frequency drive with acceleration and
deceleration control
• 12 RPM turntable maximum speed
• 4,000 lbs turntable maximum load capacity
SPECIFICATIONS
SAFETY
Para Español, vea páginas 6-10.
Pour le français, consulter les pages 11-15.
IMPORTANT! Read instructions thoroughly
and familiarize yourself with ALL controls and
operating features.
NOTE: Check the machine for damage.
If damage is found, contact Uline customer
service at 1-800-295-5510.
CAUTION! When servicing drive and controllers,
exposed components with housings or
protrusions may be at or above line potential.
Extreme care should be taken to protect
against shock.
IMPORTANT! Both the ramp and the machine
should be lagged to floor before use.
• User is responsible for conforming to all applicable
code requirements with respect to grounding all
requirements.
• Do not use extension cords to operate the
equipment.
• Disconnect AC input power before checking
components, performing maintenance, cleaning,
and when machine is not in use. Do NOT connect
or disconnect wires and connectors while power is
applied to circuit.
• Wiring work should be carried out only by qualified
personnel to avoid electrical shock or fire.
• Loose clothing must not be worn while the machine
is in operation. Stay clear of moving parts while the
machine is running.
