0513 IH-1027
PAGE 11 OF 11
pIston replaceMent
1. Remove screws and nut with 8 mm spanner wrench
and 4 mm Allen wrench. (See Figure 31)
2. Remove magazine assembly. (See Figure 32)
3. Loosen set screw with a 3 mm Allen wrench to unlock
the adjusting rod.
4. Slide linkage mechanism and adjusting rod
simultaneously from collar.
5. Loosen collar with a 3 mm Allen wrench to remove
the spring. (See Figure 33)
Magazine Assembly
Cap
Piston Assembly
Spring
6. Loosen screw with a 3 mm Allen wrench and remove
the block through the window.
7. Loosen screws with a 3 mm Allen wrench and
remove the cap. (See Figure 34)
8. Remove the piston assembly with a 10 mm spanner
wrench. (See Figure 35)
9. Remove piston and replace.
operatIng InstrUctIons contInUed
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com
Figure 31
Figure 34
Figure 32
Figure 35
Figure 33
