![background image](http://html1.mh-extra.com/html/u-line/h-1024/h-1024_instruction-manual_3130295003.webp)
PAGE 3 OF 18
0323 IH-1024
OPERATION CONTINUED
CLINCH ADJUSTMENT
Loosen securing nut closest to body. Turn adjustment nut
clockwise to loosen clinch. Turn adjustment nut counter-
clockwise to tighten clinch. After adjusting, tighten
securing nut. (See Figure 5)
DEPTH ADJUSTMENT
1. Loosen front two screws with 4 mm Allen w rench.
(See Figure 6)
2. Push the body up and adjust to the desired depth.
(See Figure 7)
BASIC OPERATION
1. Insert the staples into the stapler following the
loading instructions.
2. Grasp the handle with one hand on box in line
with the desired staple location. There is a small
projection on either side of the magazine seat as an
aid in locating the position of the staple.
3. For strongest closure, use staples close to the ends of
the box.
CLEARING A JAM
1. Pull pusher back and rotate to a locked position.
(See Figure 8)
2. Insert needle nose pliers or screw driver to clear jam.
(See Figure 9)
3. Slowly release pusher back to position.
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9