U-Line Echelon 2075DWRR, Service And Parts Manual Supplement

Page: 63 / 76

53
Design
■
Features
■
Performance
REPLACING ICE MAKER ASSEMBLY
1. Remove unit from installation.
2. Disconnect water and unplug unit.
3. Disconnect ice maker wire harness at plug in back of unit
(1) .
4. Remove thermistor from the sensing tube on ice maker assembly (2) .
5. Remove water inlet tube.
6. Remove front cover
(3) .
7. Advance ejector blade to the 3 o’clock position by turning the 5/16" hex head on the small brass gear
counterclockwise (4) .
8. Remove two screws from icemaker bracket (5) .
9. Remove ice maker assembly.
10. Install new ice maker assembly.
11. Reconnect plug.
12. Insert thermistor ice maker sensing tube.
13. Insert water inlet tube.
14. Apply Permagum
®
to all exit holes.
15. Install back panel.
16. Plug in unit and test.
1
5
2
4
5
3
DWR064
CO2075DWR