QUICK START GUIDE
u-line.com
16
Temperature displayed reflects actual
temperature inside unit.
NOTICE
Before attempting to fill the keg it is
necessary to confirm system is
not pressurized.
1. Shut off nitrogen tank by turning
handle clockwise until it stops.
Initial startup requires no adjustments. If the unit was
turned off, press and hold for 5 seconds to turn unit on.
See “Control Operation” section for more details.
If the temperature displayed is different than selected, the
unit is progressing towards the selected temperature. Time
to reach set point varies based upon ambient temperature,
temperature of product loaded, door openings, etc. U-Line
recommends allowing the unit to reach set points before
loading.
To dispense cold coffee, make sure the components are
assembled according to the instructions in GENERAL
INSTALLATION.
NOTICE
DE-PRESSURIZE SYSTEM
First Use
Fill the Keg
2. Lift up on
pressure
release valve
ring. Allow
pressure to
release.
3. Detach hoses from keg. (See General Installation
section of this guide.)
4. Remove keg from refrigerator.
5. Lift handle and remove lid.
6. Fill keg with cold brew.
7. Replace and lock down lid.
8. Reattach hoses.
Control Operation
CONTROL FUNCTION GUIDE
FUNCTION
COMMAND
NOTES
ON/OFF
Press and hold for 5 seconds
Unit will turn On or OFF
Adjust Temperature
Press or and release
When the display is flashing, press or to
adjust the set point temperature.
Toggle between
º
F /
ºC
Hold and for 5 seconds
The display will change units
