PAGE 2 OF 9
0418 IH-5135
NOTE: When using AC adapter (AD-E001):
• Insert the plug on the adapter cord into the
AC adapter jack on the side of the machine.
• Insert the plug into the nearest electrical
outlet. For memory backup, we recommend
using AA alkaline batteries (LR6) or Ni-MH
batteries (HR6) together when using the
AC adapter.
• To safeguard and backup the printer's memory,
when the AC adapter is unplugged, it is
recommended to have AA alkaline batteries (LR6) or
Ni-MH batteries (HR6) installed in the printer.
• When power is disconnected for more than two
minutes, all text and format settings will be cleared.
Any text files stored in the memory will also be
cleared.
WARNING! Using a combination of different batteries (such as Ni-MH and alkaline), may result in an
explosion. Dispose of used batteries according to the instructions.
INSERTING A TAPE CASSETTE
Figure 2
Tape Compartment Cover
Tape Cutter Lever
Printhead
Tape Cassette
Compartment
Release Lever
Tape Cutter
Tape Exit Slot
LCD Display
Keyboard
NOTE: When inserting the tape cassette,
make sure that the tape and ink ribbon do
not catch on the printhead. (See Figure 2)
• If you cannot close the tape compartment
cover, check to ensure the release lever in
the up position. If not, lift the lever and then
close the cover.
Battery Compartment
Cover
Battery Case
AC Adapter Jack
Figure 1
POWER SUPPLY AND TAPE CASSETTE
Insert six new AA alkaline
batteries (LR6) or fully
charged Ni-MH batteries
(HR6), making sure that their
poles point in the correct
directions. To remove
the batteries, reverse the
installation procedure.
(See Figure 1)
SETUP
