Use & Care Guide
5
Ice Machines
Fahrenheit / Celsius
Temperature and Set point information can be displayed in either
Fahrenheit or Celsius.
To change from Fahrenheit to Celsius enter the Fahrenheit / Celsius
menu from within the Customer Menu.
1. Use Down
to select “Degrees”.
2. Press Select
. The selection will begin to flash.
3. Use Up
or Down
to select between °F (Fahrenheit) or °C
(Celsius).
4. Press Select
to confirm your choice.
Clean Cycle
A clean cycle can be initiated through this menu. Once the cleaning
cycle starts, the cycle cannot be stopped until complete.
To initiate a clean cycle, enter the Clean Cycle in the Customer
Menu. Please refer to CLEANING section regarding proper cleaning
procedure.
1. Use Down
to select “Clean Cycle”.
2. Press Select
. The clean cycle will now begin.
3. Refer to CLEANING section regarding proper cleaning procedure.
Silent Mode
Users can halt ice production for 3 hours with an option called
“Silent Mode” in the Customer Menu. Silent Mode will begin once
the current ice making cycle is complete. After 3 hours in Silent
Mode, normal ice production will continue.
NOTE: Silent Mode will not silence any alerts.
To initiate Silent Mode, enter Silent Mode Menu from within the
Customer Menu.
Activating Silent Mode
1. Use Down
to select “Silence?”.
2. Press Select
. Silent Mode will now begin.
Cancelling Silent Mode
1. Use Down
to select “Cancel?”.
2. Press Select
. Silent Mode will end.
Ice Adjust
The Ice Adjust option adjusts ice thickness by adding or subtracting
up to 5 minutes of ice production.
To change the ice thickness, enter the Ice Adjust menu from within
the Customer Menu.
To adjust thickness
1. Use Down
to select “Ice Adjust”.
2. Press Select
. The selection will begin to flash.
3. Use Up
to make the ice thicker or Down
to make the ice
thinner.
4. Press Select
to confirm your choice.
Up
Select
Down
RETURN TO MENU
FARENHEIT/CELSIUS
DEGREES = °F
Up
Select
Down
RETURN TO MENU
CLEAN CYCLE
CLEAN?
Up
Select
Down
RETURN TO MENU
SILENT MODE
SILENCE?
Up
Select
Down
RETURN TO MENU
ICE ADJUST
ICE ADJUST = 0
