PAGE 5 OF 27
0820 IH-7242
POWER SWITCH AND CONNECTIONS
After checking the power supply, the system can be
switched on. The main switch is on position "I."
SELECTING INITIAL FILM TYPE
There are three different film types available for
selection when turning on the machine.
Select air pillows, bubble or
cushion film options by pressing
six times until film type shows
up.
Press or to change the
film type.
DESCRIPTION
ULINE
PART NO.
CUSHION SIZE
SPACING GUIDE
Air Pillows
S-22467
8 x 4"
11/16
"
Air Cushion
S-22468
1⁄ x 9 x 13"
1/2
"
Bubble Film
S-22469
3/4 x 6 x 13"
1/2
"
START FILM PRODUCTION
Once a menu is selected with its pre-set parameters the
machine is ready to operate. Every menu follows the
same steps:
Machine is ready to start
Air Pillows film production.
Press to start
Air Pillows film production.
Press again to stop
Air Pillows production.
HOW TO ADJUST AIR SETTINGS
The chosen film type menus automatically run on the
correct air and temperature settings. You do not need
to adjust machine setting manually, but if the automatic
settings are not optimal, the keypad allows you to
change the following settings:
Display Air Pillows
Ready to start
Press 1 x
for air settings.
SETTING UP THE DEVICE CONTINUED
Air Pillows
ULINE S-22467
AIRmove
2
Air Pillows
ULINE S-22467
180
AIRmove
2
Air Pillows
ULINE S-22467
AIRmove
2
Air Pillows
ULINE S-22467
AIRmove
2
Air Pillows
ULINE S-22467
AIRmove
2
Air Pillows
