3
Blade Replace method
Matters:
1.Take out to replace the tail blade,
according to the figure change
corresponding to the tail blade.
If change error, will not be able to
control.
2.Tail blade A turn counterclockwise
direction,Tail blade B turn clockwise
direction.
R/C BATTERY INSTRUCTION
Notes:
Recommended to install or replace the battery under the parental guidance.
Avoid replace the battery only when the products weakened.
Keep the instruction for future reference.
Use this product in strict accordance with the instructions.
In a static environment,the product may cause malfunction.
Recommended to use new batteries to play the best features.
1.Non-rechargeable battery can not be charged.
2.Rechargeable battery can only be charged under the supervision of adults.
3.Rechargeable battery shall be taken out from the tool before charging. (only applicable for
remote controller)
4.Batteries with different types or new and used batteries can not be used together.
5.Only same or suggested batteries can be used.
6.Install battery with correct polarity.
7.Take exhausted battery out of the tool.
8.Avoid short circuit at terminals of battery.
9.Before charging, check if the charger is damaged; and if it is damaged, please use it after
repair all damages.
10.Do not contact the rotating propeller directly with hand, or it may cause injury.
11.When playing flying tool, please keep your hair and loose clothes away from the propeller.
12.Please check the wire, plug, shell and other parts of charger periodically, and if there is any
damage, stop using it till it is repaired.
Warning:
Bladev A
Blade B
Blade A
Install the battery on
given instruction and
tight the cover again.
Use the screwdriver
according to the given
direction of the arrow
to open.
Blade B
