6
OPERATING METHOD
1.Put the power into the drone slot,open the drone power switch and placed on level ground
smoothly,and then open the remote controller switch.The remote controller indicator light
will flash frequency for the state.After the frequency of state succeed,the controller's
indicator light will be bright.The drone head lights will be bright after flashing 2-3 times and the back
lights will flash all the time.At this time,you can control the drone fly.
2.Gyroscope Connection : Insert the power wire into the drone slot.And stably placed at ground.
Turn on the remote controller power switch.The acceleration handle up and down.Then the
acceleration handle and direction pull in the lower right corner.Drone lights will flash before
constant light.At the same time,release handle,illustrated manual successfully(Gyroscope have
been connected before shipping.No need to connect again.)
3.When the drone is flying beyond the remote control distance,and is out of control state(drone lights
flashing),As long as the drone is in the receiving signal,then refuels the throttle,the drone can fly again.
Ascend
Descend
Change
direction
Forward
Backward
When you push upward of the
left handle,the main blades speed
increases,the drone ascends.
When push downward of the left
handle,the main blades speed
slow down,the drone descends.
When push the left handle to left,the drone's
head turn to left.When push the left handle
to right,the drone's head turn to right.
When push upward of the right
handle,the drone's head down
and moving forward.
When push downward of the right
handle,the drone's head up and
moving backward.
2.4G FREQUENCY FOR INSTRUCTIONS
side to
side fly
Forward
tumbling
key
Backward
tumbling
key
Left
tumbling
key
Right
tumbling
key
When the right operating rod is pushed towards
to left,the left side of drone down and forward.
When the right operating rod is pushed towards
to right,the right side of drone down and forward.
When the drone stop spinning in the air,press the key
button on the left side back of the controller,then control
the forward handle,it will turn forward 360 degrees.
When the drone stop spinning in the air,press the key
button on the left side back of the controller,then control
the backward handle,it will turn backward 360 degrees.
When the drone stop spinning in the air,press the key
button on the left side back of the controller,then control
the left side fly handle,it will turn left side 360 degrees.
When the drone stop spinning in the air,press the key
button on the left side back of the controller,then control
the right side fly handle,it will turn right side 360 degrees.
