u-blox NORA-W2 Series, Hardware Integration Manual

Page: 44 / 61

NORA-W2 series - Hardware integration manual
UBX-22005177 - R01 Regulatory compliance Page 44 of 61
C1 – Public
6.9 Australia and New Zealand regulatory compliance
The NORA-W2 modules are compliant with the standards made by the Australian
Communications and Media Authority (ACMA).
The modules are compliant with AS/NZS 4268:2012 standard – Radio equipment and systems – Short
range devices – Limits and methods of standard measurement. The test reports for NORA-W2
modules can be used as part of the product certification and compliance folder. For more information
on the test reports, email the respective support team at the local mail address in your region. To
meet the overall Australian and/or New Zealand end product compliance standards, the integrator
must create a compliance folder containing all the relevant compliance test reports such as RF, EMC,
electrical safety and DoC (Declaration of Conformity). It is the responsibility of the integrator to know
what is required in the compliance folder for ACMA compliance.
For more information on Australia compliance, refer to the Australian Communications and Media
Authority web site
http://www.acma.gov.au/ .
For more information on New Zealand compliance, refer to the New Zealand Radio Spectrum
Management Group web site
www.rsm.govt.nz .
6.10 South Africa regulatory compliance
NORA-W2 series modules are compliant and certified by the Independent Communications Authority
of South Africa (ICASA). End products that are made available for sale or lease or supplied in any other
manner in South Africa shall have a legible label permanently affixed to its exterior surface. The label
shall include the ICASA logo and the ICASA issued license number, as shown in the figure below. The
minimum width and height of the ICASA logo shall be 3 mm. The approval labels must be purchased
by the customer’s local representative directly fro m the approval authority ICASA. A sample of a
NORA-W2 ICASA label is shown below:
More information on registration as a Responsible Integrator and labeling requirements can be found
at the Independent Communications Authority of South Africa (ICASA) web site:
https://www.icasa.org.za
6.11 Safety compliance
For compliance with safety standard EN 62368-1, NORA-W2 modules must be supplied with a Class-
2 Limited Power Source.
APPROVED
xx-xxxx/yyyy