JODY-W2 - System integration manual
UBX-18068879 - R14
System description
Page 19 of 84
C1 - Public
Approved antenna designs
JODY-W2 modules come with a pre-certified design that can be used to save costs and time during
the certification process. To minimize this effort, the customer is required to implement antenna
layout according to u-blox reference designs. Reference design source files can be provided on request
by u-blox.
4
For Bluetooth and Wi-Fi operation, the module has been tested and approved for use with the
antennas listed in the JODY-W2 series data sheet
. The module may be integrated with other
antennas. In this case, the OEM installer must certify his design with respective regulatory agencies.
1.6
Other remarks
Unused pins
☞
JODY-W2 modules have pins that are reserved for future use (
NC
). These pins must be left
unconnected on the application board.
GPIO usage
☞
The reconfiguration of signals marked as GPIOs on the JODY-W2 module for applications not
listed in this document depends on the respective firmware release.
4
Reference design will be available after certification.
