u-blox EVK-R6, User Manual

Page: 9 / 27

EVK-R6 and EVK-L6 - User guide
UBX-21035387 - R03 Starting up Page 9 of 27
C1-Public
Dual-in-line board-to-board connector J104 Dual-in-line board-to-board connector J103
Signal name Pin N° Pin N° Signal name Signal name Pin N° Pin N° Signal name
Not connected 1 2 GND Not connected 1 2 GND
Not connected 3 4 Not connected Not connected 3 4 Not connected
Not connected 5 6 Not connected RFCTRL1 2 5 6 RFCTRL2 2
GND 7 8 GND Not connected 7 8 VCC
GND 9 10 GND VCC 9 10 VCC
DTR 11 12 DCD Not connected 11 12 Not connected
CTS 13 14 RTS SIM_IO 13 14 VSIM
RXD 15 16 TXD SIM_RST 15 16 SIM_CLK
DSR 17 18 RI Not connected 17 18 Not connected
Not connected 19 20 Not connected SCL 19 20 Not connected
Not connected 21 22 Not connected Not connected 21 22 SDA
GPIO6 23 24 GPIO5 Not connected 23 24 Not connected
Not connected 25 26 GPIO4 RESET_N 25 26 Not connected
Not connected 27 28 Not connected Not connected 27 28 Not connected
Not connected 29 30 PWR_ON Not connected 29 30 Not connected
GPIO3 31 32 GPIO2 Not connected 31 32 Not connected
Not connected 33 34 GPIO1 Not connected 33 34 Not connected
V_INT 35 36 Not connected Not connected 35 36 Not connected
Not connected 37 38 Not connected Not connected 37 38 Not connected
Not connected 39 40 Not connected Not connected 39 40 Not connected
GND 41 42 Not connected GND 41 42 Not connected
Table 5: Pin-out of the 42-pin dual-in-line board-to-board connectors (J103, J104) available on the adapter board ADP-R6/L6
of the EVK-R6 and EVK-L6 evaluation kits for LARA-R6/L6 series modules
☞
The pins / interfaces that are not supported by a specific LARA-R6 / LARA-L6 product version
should not be driven by an external device (see the LARA-R6 series data sheet
[2] , the LARA-L6
series data sheet [3] and the LARA-R6 / LARA-L6 series system integration manual [4] for the
features supported by each LARA-R6 / LARA-L6 product version).
1.7 Software installation
The LARA-R6 and LARA-L6 USB drivers for Windows OS are available with the EVK-R6 and EVK-L6.
Download the executable file from
https://www.u-blox.com/en/product/evk-r6 and save it to any
location on the computer. Start the installation by running the executable.
2 LARA-R6401 and LARA-R6401D only. Pin reserved for future use (RSVD) otherwise.