Lexis Light
–
ET1B
User’s Manual T. Rev. 0512 PM 18
Monthly Care
Clean upholstery, plastic and metal parts with a mild surface cleaner.
CAUTION:
Keep cleaning solvents away from electrical wires and connectors.
Half-Year Care
1. Apply a lubricant/cleaner (such as WD40 or similar) these locations:
Column tilt lock pin and housing.
Unfolded lock pin and housing.
Battery pack lock pins.
2. Lightly apply Vaseline or similar lubricant to battery contact pins and
springs on front column.
3. Check for tire wear.
Fuse Replacement Instructions
A fuse protects the wiring and battery in the
event of a short circuit. If your
Lexis Light
stops abruptly, check the fuse. If it
has 'blown', check for overloads or short
circuits.
The fuse is located inside the battery case.
To replace the fuse, open screws (Fig. 15/1)
and remove cover (Fig. 15/2). Remove the
fuse (Fig. 15/3) from its socket. If 'blown',
replace with the same style and size
(automotive “blade” type – 20 A). There is a
spare fuse attached to the battery-pack
cover.
WARNING:
Do not attempt to repair or service the
Lexis Light
or any
of its components, as this will void your warranty.
SERVICE AND REPAIR: CONTACT YOUR AUTHORIZED DEALER.
Figure 15
1
3
2
