Lexis Light
–
ET1B
User’s Manual T. Rev. 0512 PM 14
WARNING:
Store batteries in the 'correct' position. (See Fig. 14).
Battery Replacement and Disposal
The Easy Fold Deluxe battery pack contains two 12V maintenance-free
batteries. Replacement of the batteries is only permitted to an authorized
dealer.
Battery cells may emit minor acid fumes.
Batteries must be recycled. Disposals of potentially damaged batteries
present hazards of injury from acid leakage and environmental pollution.
NOTE: When removing a battery, always set it on cardboard, newspaper,
or surfaces that cannot be damaged by acid fumes or liquid from the
battery.
6. MOVING AND TRANSPORTING YOUR
Lexis Light
6.1. Moving your
Lexis Light
in freewheel mode when unfolded:
The freewheel switch (Fig. 1/17) is used for releasing the brake and
moving the
Lexis Light
without operating the motor. Before
activating, make sure your
Lexis Light
is switched on
.
Turn
Freewheel switch to the "freewheel" position and push or pull the
Lexis
Light
manually.
NOTE:
The Freewheel mode can only be activated
after
the battery is in
place and the power switch (Fig.9/1) is turned on. Doing otherwise will
cause a fault situation indicated by rapid flashing of the Indicator light
(Fig. 9/4). See section 4.2.
WARNING:
The Freewheel switch should never be engaged on a slope
when
Lexis Light
is occupied and without assistance to prevent
unintended rolling. If Freewheel is activated on a slope unintentionally
,
turn your
Lexis Light
power switch OFF
immediately to activate brake.
CAUTION:
The seat back must remain in the upright position.
