Tysso VFD-450 Series, User Manual

Page: 15 / 19

Mode 1: EPSON Esc/POS mode commands list
Command Code description Function description
(hex)
HT 09 move cursor right
BS 08 move cursor left
US LF 1F 0A move cursor up
LF 0A move cursor down
US CR 1F 0D move cursor to right-most position
CR 0D move cursor to left-most position
HOM 0B move cursor to home position
US B 1F 42 move cursor to bottom position
US $ x y 1F 24 x y move cursor to specified position
X=1-20 y=01,02
CLR 0C clear display screen
CAN 18 clear cursor line
US E n 1F 45 n n=00-ff blink display screen
ESC @ 1B 40 initialize display
ESC R n 1B 52 n n=30~44 select international character set
US MD1 1F 01 specify overwrite mode
US MD2 1F 02 specify vertical scroll mode
US MD3 1F 03 specify horizontal scroll mode
ESC W n s x1 1B 57 n s x1 y1 x2 y2 specify/cancel the window range
y1 x2 y2 n=1,2,3,4 1<=x1<=x2<=20
s=0, 1 1<=y1<=y2<=2
ESC = n 1B 3D n select peripheral device
n=31H, enable printer, n=32H (default)
disable display
n=32H, enable printer,
disable printer
n=33H, enable printer,
enable printer
n=34H, message for only for double sides display
customer side
n=35H, message for
operator side
Command Code description Function description
Command Code description Function description
(hex)
US: 1F 3A set starting/ending position of
macro definition
US ^ n m 1F 5E n m execute and quit macro
00<=(n,m)<=ff
US @ 1F 40 execute self-test
US T h m 1F 54 h m display time
0<=h<=17,
0<=m<=3b
US U 1F 55 display time continuously
US.n 1F 2E n n= a displayable character code
Display the code with a dot
US,n 1F 2C n n= a displayable character code
Display the code with a comma
US;n 1F 3B n n= a displayable character code
Display the code with a semicolon
US#nm 1F 23 n m Turn the anuciator ( ) ON/OFF
n = 0 ro 1
0 <=m<=20
(hex)
BS 08 back space
HT 09 horizontal tab
LF 0A line feed
CR 0D carriage return
DLE 0F display position
DC1 11 over write display mode
DC2 12 vertical scroll mode
DC3 13 cursor on
DC4 14 cursor off
ESC d 1B 64 change to UTC enhanced mode
US 1F clear display
Mode 2 : UTC standard mode commands list
-26- -27-