– 2 –
– 2 –
PERSONNEL QUALIFICATIONS
only personnel with basic technical training and who are in a position to identify the various material groups should be involved
in disposal.
DISPOSAL REGULATIONS
the normal local and regional rules and guidelines must be observed when disposing of the machines making up the table
saw.
DISPOSAL REGULATIONS
the dismantled parts of the table saw are sorted by material and sent separately to the appropriate collection points. ensure that
the following parts in particular are properly disposed of.
the table saw consists of the following materials:
- cast aluminium
- rolled aluminium products
- Bronze
- Steel
- rubber
- rubber / nylon fabric
- Synthetic grease
- Plexiglas
OBLIGATION OF NOTIFICATION
when a table saw is taken out of service and disposed of the manufacturer tyrolit hydrostress aG or the corresponding
service centre must be informed of this.
the operator can recycle or dispose of the table saw himself provided he observes the
statutory provisions. in order to dismantle the table saw correctly and to properly remove the
materials some knowledge in the area of mechanics and knowledge about differentiation of
waste materials is necessary.
if during correct disposal doubts arise that represent a hazard for persons or the environment,
the after-sales service of tyrolit hydrostress aG will be happy to provide information.
voltage warning
Before working in an area identified in this way, the installation or device must be fully
disconnected from the power (voltage) and secured against being accidentally powered up
again.
failure to head this warning may lead to death or serious injury.
DANGER
DISPOSAL
GENERAL
