13
6.2 Fuel / Lubricant
−
Petrol motor – see Honda operating manual
−
Lubricate bearings
* Energrease LS2 BP
IMPORTANT
We hereby advise that damage occurring within the motor’s warranty period
may be repaired only by an authorized service partner (see service directory
for motor)!
7. Repair of malfunctions
7.1 Standard tool
−
Combination wrench SW 24
7.2
Fault
Cause
Remedy
Low cutting performance
Saw blade is blunt
Too little cooling water
V-belt slips
Motor does not produce
full power
Replace saw blade
Clean water cooling system
See point 7.3 and 7.4!
See operating manual for
motor!
Floor Saw does not start
Motor damage or incorrect
operation
See operating manual for
motor!
Please follow the motor manufacturer’s operating manual!
7.3 Check the V-belt tension
−
Remove protective cap
−
With medium force, it should be possible to depress the V-belt by one belt thickness
7.4 Adjusting the V-belt tension
−
Loosen the 4 screws (Motor/chassis)
−
Loosen the jam nut and turn the bolt until the belt tension is correct, then retighten the jam nut
Retighten the 4 screws (Motor)
