12
5. Operation
5.1 Normal cutting operation
−
Initiate feed movement through steering rod
−
Adjust feed speed to the feed force
−
If feed force is too great, you must check the following points:
* Saw blade dull?
* Too little cooling water?
* Saw blade choice correct?
* Is the motor producing its full power or speed?
−
Take care to achieve a straight cut so the saw blade does not jam.
5.2 Cooling water
−
Make sure the saw blade is adequately supplied with cooling water
* Use only clean water
* Do not bend water hose
5.3 Shut-down
−
Shut down motor (see operating manual for Honda motor)
−
Secure Floor Saw by snapping the brake mechanism
6. Maintenance
6.1 Servicing
•
Before starting any maintenance work – activate brake (item 13) / shut down motor
Maintenance work
daily weekly monthly
Clean Floor Saw thoroughly
ATTENTION: Cleaning with steam jet is not permitted!
X
Check the oil level of the motor
X
Change motor oil (see operating manual for motor)
ATTENTION:
Place a suitable oil receptacle (funnel) under the oil drain plug.
Grease lubrication points (bearings)
(regular lubricating grease)
X
Tighten all bolts after 20 hours of operation
Tighten V-belt after the first 2 hours of operation
Please follow the motor manufacturer’s operating manual (which is included with every new
machine); pay particular attention to the safety and maintenance rules.
