7
1.6 Notice on specific hazard types
1.6.1 Electricity
1.6.1.1
Only use original fuses with the specified amperage! If the electrical power supply is
interrupted, shut down the machine immediately!
1.6.1.2
Work on electrical equipment may only be carried out by electricians or by trained persons
under the guidance and supervision of an electrician in accordance with electrical
regulations.
1.6.1.3
The electrical equipment on the machine should be inspected/checked on a regular basis.
Defects, such as loose connections or scorched cables, must be repaired immediately.
1.6.2 Dust
1.6.2.1
Observe applicable national regulations when working in enclosed spaces!
1.6.3 Noise
1.6.3.1
Wear required personal hearing protection!
1.7 Transport
1.7.1
When loading, use only hoists and lifting gear with sufficient capacity!
1.7.2
Appoint a trained supervisor for the lifting procedure!
1.7.3
Machines should be lifted with lifting gear correctly in accordance with the specifications in
the operating manual (lifting points for load-lifting equipment, etc.)!
1.7.4
Use only suitable transport vehicles with sufficient lifting capacities!
1.7.5
Secure the load reliably. Use suitable lifting points!
1.7.6
Disconnect all power sources before moving the machine, even for very short distances!
Ensure that the machine is correctly reconnected to the power supply before restarting!
1.7.7
Restart the machine strictly in accordance with the operating manual!
