9
TyrePal Limited, Unit 2 Glen Industrial Estate, Essendine, Stamford, PE9 4LE. United Kingdom
Tel: +44 (0)1780 755490 e-mail: [email protected] www.tyrepal.co.uk
© TyrePal Ltd 2013
TC215E 20130319
4.5 Install the monitor
Various fixing options are available for the monitor. Make sure it does not obstruct the
driver’s view when installed.
Screw mount:
The monitor mount can be permanently fixed to the vehicle with the bracket. Dismantle
the suction holder and re-assemble it with the metal bracket in place of the suction cup.
Click the monitor into position. If required it can be unclipped for removal.
4.6 Connect the power
Connect the monitor to the vehicle power supply (12V or 24V) via the power adapter or
using the hard wired cable (red wire to
+
positive, black to
-
negative). It operates on a
rechargeable battery for about 60 hours on a full charge.
Free standing:
Fit the monitor stand in the holes in the back of the
monitor and position it where it can be seen. Note that
the stand is a tight fit in the holes.
Windscreen mount:
Clip the monitor to the holder, moisten the suction pad
and press it to the windscreen. Lower the lever to secure
the pad to the windscreen.
To remove it, lift the lever to break the suction, or unclip
the monitor from the holder.