typical GT1790A, Instruction Book

Page: 53 / 85

- 50 -
(2) Editing method of continuous sewing data
1) Set the mode to the input mode
Under the input mode where Set Ready LED
goes out, the continuous-sewing data entry is
enabled. In sewing mode, press Ready key
❷
to change over the mode to input mode.
2) Call the edited continuous sewing data NO.
When Edit key
❽
is pressed, the
continuous-sewing data editing display C appears
on the screen. The pattern No. D to be sewn is
displayed in reverse video.
The data is editable in this state.
3) Select editing point
Press Edit key
❻
and then the editing point
will move and reverse sequentially. When the
editing point is carried to the last piece of data, the
additional indication pictograph is displayed if
there is an available pattern number. Move forward
the editing point from there and then the data name
will become the editing point.
In addition, press Edit key on editing point and
then it will turn to the state in which the editing
point data can be changed.
When the editing point is pattern No., the appended
indicator icon will display in selection position and
now you can insert the pattern data.
When the editing point is data name, the data name
will become editable.
Editing point selection sequence after pressing Item Selection key
Pattern name
Icon No.
Pattern number to be added to
the last piece of data (can only
be selected in the case an
available pattern number that
can be input is left)