TYM T474 Manual Download Page 100

Page: 100 / 175

5 -

Maintenance and service

Opening hOOd

①

Slide the hook to the side. Then,

the hood opens with a clicking

sound.

►

1. Opening cOvers

To prevent any possible failure,

some items should be checked

daily.
Make sure to perform inspection be-

fore driving.

inspectiOn iteMs

Inspect each part in the following

order:

►

2. inspectiOn iteMs

①

Check the items that were

faulty yesterday.

②

Go around the tractor and

check:

- Lamps for proper illumina-

tion and damage

- Tires for inflation pressure,

crack, damage and wear

- Rotating parts for loose

bolts and nuts

- Transmission fluid level
- Implement attachment sta-

tus

Maintenance and service

②

Lift the hood with hands. Then,

the hood is automatically opened

and fixed by its damper.

T4NO503A

Hood Lock Pin

T4HO501A

Hood

T474NH-영문-05(마).indd 2

2019-08-16 오전 11:30:27

Summary of Contents for T474
















































































































































































Search results

Summary of Contents for T474

Reviews:

Related manuals for T474

Brands by name

Popular brands

TYM T474, Manual

Search results

Summary of Contents for T474

Reviews:

Related manuals for T474

Brands by name

Popular brands