Tylo SENSE SPORT, User Manual

Page: 7 / 68

5
TROUBLESHOOTING
Troubleshooting the sauna heater
Table 1: Troubleshooting the sauna heater
Symptom Possible cause Remedy
Heater is not work-
ing.
Thermostat is not
set high enough.
Timer is not in the
range correspond-
ing to ON.
Raise the thermo-
stat setting.
Raise the time set-
ting, but not higher
than 3 hours.
Heater is not work-
ing.
Fuses in the distri-
bution board have
blown/tripped.
Replace/reset the
fuses in the distribu-
tion board that have
blown/tripped.
Heater is not work-
ing.
Internal temperat-
ure cut-out activ-
ated. For more de-
tails, see The sec-
tion called Temper-
ature cutfunction ,
Page 5.
Check and remedy
the cause of tem-
perature cut-out ac-
tivation.
Contact an elec-
trician to reset the
cut-out.
The fuses/earth
fault breaker in the
distribution board
trip as soon as the
heater is turned on
or during operation.
The heater has re-
mained inactive for
a long time, causing
an insulation fault
in the tubular ele-
ments.
Switch off the heat-
er and do not use
it. Contact an elec-
trician to check the
fault, or contact the
dealer during the
guarantee period.
Temperature cutfunction
The temperature cut-out in the heater has the purpose of protect-
ing the components, tubular elements and woodwork in the sauna
from overheating. If the temperature cut-out is triggered, it must
be reset before the heater can be turned on again. The cause of
the overheating must be established before resetting the temper-
ature cut-out.
SPARE PARTS LIST
7
8
1
2
3
4
5
6
Figure 8: Spare parts
1. 9600 0177 / 8 kW, 9600 0178 / 6 kW Tubular element
2. 9600 0728 Stone compartment
3. 9600 0258 Thermostat
4.
9600 0723 Terminal block
5. 9600 0012 Timer 9+3 6-pole
6. 9600 0554 Strain relief connector
7. 9600 0129 Thermostat dial
8. 9600 0128 Timer dial