3
STEP 6:
Insert the battery platform
in the bottom of the enclosure. The
battery platform has cutouts so
wires can be routed under the bat-
tery as needed.
STEP 7:
Attach the DIN Rail
adapters to the charge controller
using the screws provided. Clip the controller
to the DIN rail by putting the bottom of the DIN
bracket into the bottom of the DIN rail, then
push DIN bracket up and over the top of the
DIN rail.
STEP 8:
Assemble the solar panel mount
and set the correct tilt angle based on
your Latitude. There is a useful tool to
calculate optimum angle at
fixed angle all year we recommend using
the optimum angle for winter sun. You can also calculate winter tilt us-
ing: Your_Latitude*0.9+30. Mount the solar panel mount to the pole
using hose clamps provided. Be sure to mount high enough so the
door of the enclosure clears the solar panel mount when opened. You
can also mount the panel to a wall using lag bolts.
STEP 9:
Attach the solar panel to the solar panel mount so that the
wire junction box is towards the top or side.
If the solar panel is already connectorized, connect the solar panel MC
-
4 connectors to the included solar cable.
If the solar panel is not connectorized, remove the cover from the solar
panel junction box by unscrewing or releasing the 6 snaps. Connect the
included octopus cable wires to the + and
-
screws inside the junction
box. Replace the cover making sure it is fully snapped.
