8000096 Rev 1 December 16, 2020 1
Note: If being used for holding batteries, we suggest adding batteries to the enclosure as the final step,
once the enclosure is secured to a pole or wall.
1.
Mounting
1.1.
Attach the pole/wall brackets to the enclosure using the 4 stainless steel bolts.
1.1.1.
Note: There is a small support bracket that should be attached to the bottom bracket.
1.2.
Mounting to a pole: Attach the enclosure to the pole using the two u-bolts and/or 4 hose clamps.
1.3.
Mounting to a wall: Attach the enclosure to a wall using appropriate lag bolts (supplied by
customer).
2.
Ventilation
2.1.
The enclosure comes with a thermostatically controlled ventilation fan that will turn on when the
enclosure inside temperature exceeds 45deg C. The vent fan needs to be connected to a
ENC-AL-12x14x15 Quick Start Guide
