8000060 Rev 3 19-Feb-19
TyconSystems.com
7
Once the metal plate is inserted, insert both U-bolts through the
respective holes of the metal plate as shown in Figure 3.
Figure 3 U-Bolt installation
Loosely screw on the nuts on the ends of the U-bolts. You will tighten
these later during final mounting. Final assembly is shown in Figure 4.
Figure 4 U-Bolts and nuts installed
The plate and U-Bolts are not yet needed at this stage but doing this now
may help avoid damaging wind vane and wind speed cups later.
Handling of the sensor package with wind vane and speed cups installed
is more difficult and more likely to lead to damage.
Summary of Contents for TP3000WC
Page 60: ...8000060 Rev 3 19 Feb 19 TyconSystems com 60 System Setting Alarm ...
Page 61: ...8000060 Rev 3 19 Feb 19 TyconSystems com 61 Max Min Day Max Min History ...
Page 62: ...8000060 Rev 3 19 Feb 19 TyconSystems com 62 Calibration ...
Page 63: ...8000060 Rev 3 19 Feb 19 TyconSystems com 63 Record History ...