Tycon Power Systems TP3000WC Operation Manual Download Page 67

Page: 67 / 73

8000060 Rev 3 19-Feb-19

TyconSystems.com

Problem

Solution

Do not touch any buttons for several

minutes.

The remote sensor search icon

will splash on the display. Wait

several minutes for this icon to turn

off.

If the search icon turns off and the

outdoor temperature and humidity

are still showing dashes (--), the

remote sensor is defective. If the

sensor properly syncs up, proceed

to the nex

t step “How to prevent

intermittent wireless
communication”

How to prevent intermittent wireless

communication issues:

1. Install a fresh set of batteries in the

remote sensor array and console.

For cold weather environments,

install lithium batteries.

2. The maximum line of sight

communication range is

300’ but

most user

s will get 100’ or less due

to environmental conditions. Move

the sensor and remote closer

together.

3. If the sensor assembly is too close

(less than 5’), move the sensor
assembly away from the display

console.

4. Make sure the remote sensors are

Summary of Contents for TP3000WC










































































Search results

Summary of Contents for TP3000WC

Reviews:

Brands by name

Popular brands

Tycon Power Systems TP3000WC, Operation Manual

Search results

Summary of Contents for TP3000WC

Reviews:

Brands by name

Popular brands