– Connect the device to an outlet on a circuit different from the one that supplies power to the receiver.
– Consult the dealer or an experienced radio/TV technician.
FCC Compliance Statement
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in residential installations. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio and television reception.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause such interference, which can be
verified by turning the device off and on, the user is encouraged to eliminate the interference by one or more of the following measures:
l
Re-orient or re-locate the receiving antenna.
l
Increase the distance between the device and the receiver.
l
Connect the device to an outlet on a circuit different from the one that supplies power to the receiver.
l
Consult the dealer or an experienced radio/TV technician.
Warning!
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with FCC Rules Part 15 and with Industry Canada licence-exempt RSS standard(s). Operation is subject to two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference that may be received or that may cause undesired
operation.
Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux
deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique
subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement.
W.E.E.E. Product Recycling Declaration
For information regarding the recycling of this product you must contact the company from which you orignially purchased it. If you are discarding this product and not returning it for repair then
you must ensure that it is returned as identified by your supplier. This product is not to be thrown away with everyday waste.
Directive 2002/96/EC Waste Electrical and Electronic Equipment.
4. APPENDIX: SPECIFICATIONS
OPTICAL
Black Mirror Max. Coverage
Up to 12 m (40 ft) / 90°
Detector Technology
8 independent quad PIR detectors operating in true Quad configuration
Figure 6. Coverage Pattern
A.
Top view
B.
Side view of each detector
Pet Immunity
Up to 18 Kg (40 lb)
ELECTRICAL
Input Power
Two 3V CR123A Lithium batteries
Caution!
Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery according
to the manufacturer's instructions.
Battery Life (for typical use)
3 years
Low Battery Threshold
4.0 V
Operation voltage
4 V to 6.6 V
Current consumption
25 uA to150 mA
WIRELESS
Frequency Band (MHz)
Europe and rest of world: 433-434, 868-869 USA: 912-919
Maximum Tx Power
10 dBm @ 433 MHz, 14 dBm @ 868 Mhz
Communication Protocol
PowerG
Tamper Alert
Reported when a tamper event occurs and in any subsequent message, until the tamper switch is
restored
MOUNTING
D-304046 TOWER-20 PG2 Installation Instructions
6
